LandCruiser 70 SeriesDyno Tuning & Multi-Mapping
Custom calibration for both the 4.5L 1VD-FTV V8 and 2.8L 1GD-FTV, developed around the vehicle, its modifications and how it is actually used. Towing, touring, daily drivability, stronger performance and multi-mapping are available on supported setups, and a hard-cut limiter can be included as part of the tune on both the 1VD V8 and 1GD 2.8L if requested.
We Tune Both The1VD V8 & 1GD 2.8L
The 70 Series covers two very different diesel platforms, so we do not treat them as the same calibration with different numbers. The tune is built around the engine, transmission, vehicle weight, tyres, hardware and intended use.
1VD-FTV
The V8 responds well to careful fuel, boost, injection timing and torque strategy changes. Stock-hardware vehicles can gain stronger mid-range torque and response, while modified vehicles can be calibrated around upgraded intake, intercooler, exhaust and turbo hardware.
1GD-FTV
The 2.8L LC70 uses the modern 1GD platform and automatic transmission. Calibration focuses on usable torque, boost control, fuel delivery, injection timing and torque management, with transmission calibration available as part of the combination package.
Towing, Touring OrPerformance
A heavily loaded touring 79 Series needs a different calibration to a lightly loaded vehicle chasing stronger performance. Tyre size, added weight, intercooling, exhaust, intake and turbo changes all influence how the engine should be calibrated.
For towing and touring we focus on progressive torque delivery, controlled temperature and drivability under sustained load. For performance builds, the calibration is matched to the available airflow, fuel system and supporting hardware.
More ThanFuel And Boost
Exact maps vary between ECU versions and engine platforms, but both the 1VD and 1GD rely on multiple connected strategies. We calibrate the areas required for the vehicle rather than applying a generic percentage increase across the file.
Fuel Delivery
Fuel quantity is matched to airflow, load, hardware and the intended torque target.
Injection Timing
Timing is calibrated as part of the complete combustion and exhaust-temperature strategy.
Boost Control
Target and actual boost behaviour are checked under controlled dyno load.
Torque Management
Torque limiters and driver-demand strategies influence how the engine delivers power.
Throttle Response
Response can be shaped for daily use, towing, touring or a more aggressive setup.
Transmission Behaviour
Supported 2.8L automatic vehicles can have transmission calibration included with the engine tune.
Multi-Mapping,Hard Cut & More
Both 1VD and supported 1GD LC70 platforms can be configured with additional calibration features where the ECU strategy allows it.
LandCruiser 70 SeriesDyno Tuning Short
Watch a quick TechTune Performance 70 Series clip. The video only loads after you click it, keeping the page lightweight while still giving visitors an easy way to see the vehicle and tuning work.
Cooling & AirflowMatter Under Load
On vehicles that tow, tour or run higher-output hardware, intake temperature and transmission temperature become more important as load increases. Intercooler, exhaust, airbox and cooling upgrades can be selected around the actual use of the vehicle.
TechTune Performance handles the ECU and transmission calibration and dyno testing, while supporting mechanical upgrades can be organised through Airborne Suspension & Mechanical where required.
Test. Log. Calibrate.Validate.
Vehicle Assessment
Condition, modifications and intended use are reviewed first.
Dyno Test
Baseline output and behaviour are established before calibration.
Vehicle Data
Relevant engine and transmission data is monitored under load.
Map Changes
Supported ECU strategies are adjusted around the vehicle and target use.
Final Testing
The calibration is re-tested and refined where required.
1VD & 1GDTuning Options
LC70 2.8L 1GD-FTV
If the vehicle has already been engine tuned elsewhere, contact us before booking transmission calibration so we can confirm the correct approach.
LC70 4.5L 1VD-FTV V8
Modified vehicles are quoted around the hardware fitted and the calibration work required.
LandCruiser 70 SeriesDyno Tuning Perth
TechTune Performance provides LandCruiser 70 Series ECU remapping, dyno tuning, multi-mapping and 2.8L transmission calibration from our Malaga workshop for customers across Perth and regional Western Australia.
We regularly work with 76, 78 and 79 Series vehicles used for towing, touring, work, off-road use and performance builds, with calibration developed around the actual vehicle rather than a generic one-size-fits-all file.
LandCruiser 70Tuning FAQ
Do you tune both the V8 and 2.8L LandCruiser 70 Series?
Yes. We tune both the 4.5L 1VD-FTV V8 and the 2.8L 1GD-FTV platform, with the calibration matched to the engine, hardware and intended use.
Can you tune the 2.8L automatic transmission?
Yes. Transmission calibration is available on the 2.8L LC70, with a combined engine and transmission package currently listed at $1,750.
Do you offer multi-mapping on the LC70?
Yes. Multi-mapping is available on supported 1VD and 1GD LC70 vehicles, with selectable profiles configured around daily driving, towing, touring or stronger performance.
Can you add a hard cut limiter?
Yes. A hard-cut limiter can be included as part of the tune on both the 1VD V8 and 1GD 2.8L if requested.
Do modified 70 Series vehicles need a different tune?
Yes. Upgraded intercoolers, exhausts, airboxes, turbochargers and other hardware can change the airflow and load characteristics significantly, so the calibration should be matched to the actual setup.
Is the tune tested on the dyno?
Yes. Supported 70 Series calibrations are developed with controlled dyno testing and data logging so changes can be checked under repeatable load.
Ready To Tune YourLandCruiser 70?
Tell us whether you have the 1VD V8 or 1GD 2.8L, what modifications are fitted, and whether you are chasing towing, touring, performance, multi-mapping or a hard-cut limiter setup.