Hilux N80 & N90 2.8L
Custom engine and transmission calibration for Hilux utes used for towing, touring and work.
Custom 4WD and 4x4 diesel tuning in Perth for utes, wagons and touring vehicles. Every tune is developed on our mechanically linked AWD / 4WD dyno at our Malaga workshop, with ECU and transmission calibration matched to how your 4WD is loaded, towed and driven. Whether you want a tow tune, a 4x4 performance tune or better everyday drivability, the calibration is built and validated around your vehicle.
Modern diesel 4WDs leave the factory with conservative calibrations designed to suit every market, fuel quality and driver. A 4x4 diesel tune adjusts the factory engine calibration so the vehicle makes more usable torque, responds better to the throttle and holds gears more confidently when it is loaded up.
Unlike a plug-in chip or a throttle controller, which change a signal on its way to the ECU, we work at map level inside the factory ECU and, where supported, the transmission control unit. That means fuel, boost, torque limits and shift strategy are calibrated together as one drivetrain, then tested on the dyno.
Driver demand and torque limit strategies are calibrated so the 4WD responds smoothly and pulls harder through the mid-range.
Fuel quantity and injection strategies are adjusted as part of the overall tune rather than simply adding fuel.
Boost and airflow control are calibrated around the engine, turbo and any supporting hardware fitted.
Factory protection strategies are considered as part of the calibration, so the tune stays controlled under heavy load.
Where supported, shift points, lock-up and torque management are matched to the new engine output.
Larger tyres, exhausts, intakes, intercoolers and vehicle weight are taken into account in the final calibration.
A generic flash file is written to suit a broad range of vehicles, with limited testing on your actual 4WD. 4x4 dyno tuning lets us load the vehicle consistently, log what the engine and transmission are doing, and compare every change back-to-back. Learn more about our AWD dyno tuning, ECU remapping and TTP tune options.
Our AWD / 4WD roller dyno has synchronised front and rear beds, giving a repeatable environment to load compatible 4WDs and modern automatics.
Boost, fuel rail, airflow, torque control, temperatures and transmission data are logged where available, so the tune is verified, not guessed.
Your calibration is developed around your vehicle and its use, rather than a fixed "stage" file built for every 4WD of that model.
Every 4WD and 4x4 tune follows the same controlled workflow, so the finished result is driveable, repeatable and checked under load.
We check the vehicle's condition, modifications and how you use it, whether that is towing, touring, work or daily driving.
The 4WD is baseline tested on the dyno under load before any calibration changes are made.
Engine and transmission data is reviewed during testing to spot calibration or mechanical issues early.
ECU and, where supported, TCU calibration changes are made around the actual vehicle and its hardware.
The revised calibration is retested on the dyno and refined where needed for smoothness and control.
The final result is checked against how the 4WD will actually be used, from heavy towing to long touring trips.
Can tuning improve towing? A tune does not change your vehicle's legal towing capacity, which is set by the manufacturer. What it can change is how the 4WD tows: stronger usable mid-range torque, fewer unnecessary downshifts on hills, better throttle response and more controlled delivery with a caravan, camper or trailer behind it. On supported Toyota and 4JJ3 platforms, multi-mapping can give you selectable modes for towing, touring and daily driving.
Controlled torque delivery and drivability for towing and heavy load, with transmission behaviour matched to the engine where supported.
Stronger output and response for 4x4 performance where the vehicle and its supporting hardware can safely support it.
Smoother response, usable low-RPM torque and better everyday drivability for daily-driven utes and wagons.
These are the main diesel 4WD and 4x4 platforms we calibrate. Pricing shown is the current custom dyno tune price for each platform. Full options, including transmission calibration and packages, are listed on our vehicle tuning options page.
Custom engine and transmission calibration for Hilux utes used for towing, touring and work.
Prado calibration for touring and towing. The Prado 250's full-time 4WD system suits our mechanically linked dyno.
Calibration for the 2.8L and 4.5L V8 70 Series, the 200 Series 4.5L V8 and the 300 Series 3.3L twin-turbo V6.
4JJ3 engine and transmission calibration, with a 6-map selectable Multimap listed for the D-MAX and BT-50. See also the BT-50 and 4JJ3 packages.
3.0L V6 diesel calibration for the Ranger, Everest and Amarok, plus the Ranger Raptor 3.0L twin-turbo petrol.
4N15 diesel calibration for Triton and Pajero Sport owners who tow, tour or carry load.
Custom calibration for the NP300 twin-turbo diesel, developed around load and intended use.
Calibration for the 5.6L V8 Y62 Patrol, developed around touring, towing and the way the vehicle is loaded.
A tune works best when the whole 4WD is set up for the job. Alongside 4x4 tuning, our Malaga workshop builds custom 4x4 performance exhausts, fits 4WD suspension for touring and towing, and runs vehicle diagnostics before tuning so any existing faults are found first. Package deals bring the tune and supporting upgrades together into one planned setup.
Custom exhaust builds for 4WDs, matched to the tune, the sound you want and how the vehicle is used.
Suspension selected for load, towing, touring and off-road use, rather than simply chasing lift height.
Fault finding and diagnostic health checks so problems are identified before calibration work begins.
Our 4x4 dyno is at 46 Crocker Drive, Malaga, in Perth's northern suburbs. 4WD owners travel to us from Wanneroo, Joondalup and Ellenbrook, from Midland, the Swan Valley and the Perth Hills, from the Perth CBD and inner suburbs, south to Rockingham, and from regional Western Australia for custom 4WD tuning.
Our main 4WD platforms include the Toyota Hilux, Prado and LandCruiser 70, 200 and 300 Series, Isuzu D-MAX and MU-X, Mazda BT-50, Ford Ranger, Everest and Ranger Raptor, Volkswagen Amarok V6, Mitsubishi Triton and Pajero Sport, and the Nissan Navara NP300 and Y62 Patrol.
Custom dyno tunes on our core 4WD platforms are currently listed between $1,400 and $1,950 depending on the vehicle. Transmission calibration, multi-mapping and packages are priced separately. See our vehicle tuning options page for the full list.
Yes. We use a mechanically linked AWD / 4WD roller dyno with synchronised front and rear beds, so compatible vehicles can be loaded consistently while data is logged.
A tune does not change your vehicle's legal towing capacity, which is set by the manufacturer. It can improve how the vehicle tows, with stronger usable torque, better response and more controlled transmission behaviour under load.
A tow tune focuses on controlled torque delivery and drivability under load. A performance tune focuses on stronger output and response where the vehicle and its hardware support it. On supported platforms, multi-mapping lets you switch between modes.
On supported vehicles, yes. Some platforms allow the ECU and TCU to be calibrated separately, while others need the engine and transmission work planned together.
A chip or throttle controller changes signals going to the ECU. A custom tune adjusts the factory calibration itself, including fuel, boost, torque limits and, where supported, the transmission, and is tested on the dyno.
Yes. Exhausts, intakes, intercoolers, larger tyres and vehicle weight are considered when the calibration is developed.
Our workshop and 4x4 dyno are at 46 Crocker Drive, Malaga WA 6090, servicing all of Perth and regional Western Australia.
Tell us what you drive, how it is used and what modifications are fitted. We can confirm the right tuning option for your 4WD before you book.