Skip to main content
Toyota LandCruiser Prado 250 | Perth

Prado 250 Dyno Tuning Perth

Custom dyno tuning for the new Toyota LandCruiser Prado 250 2.8L 1GD-FTV V-Active diesel. The J250 combines Toyota's familiar 1GD engine family with a newer 48-volt electrical system, eight-speed automatic transmission and full-time 4WD driveline, so it needs to be treated as a modern platform rather than simply flashed like an older Prado.

2.8L 1GD-FTV 48V V-Active 8-Speed Automatic Full-Time 4WD AWD Dyno Tested
150 kW Factory maximum engine power.
500 Nm Factory maximum engine torque.
8-Speed Automatic transmission.
3,500 kg Factory braked towing capacity.
New Prado. Familiar Engine Family.

Prado 250 2.8L 1GD-FTV Tuning

The Prado 250 continues with Toyota's 2.8-litre 1GD-FTV turbo-diesel, producing 150 kW and 500 Nm in factory form. The J250 pairs it with Toyota's 48V V-Active system and an eight-speed automatic transmission, giving the new Prado a different control environment to the previous Prado 150 even though the engine family is familiar.

1GD-FTV Diesel

Proven 2.8L Base Platform

The engine remains a common-rail 1GD-FTV turbo-diesel, but calibration still needs to be matched to the Prado 250's own ECU software, torque strategy, transmission behaviour and vehicle configuration.

48V V-Active

New Electrical Integration

Toyota's V-Active system uses a 48-volt battery, motor-generator and DC/DC converter to support functions including stop-start operation and smoother drivability. Engine tuning must work with the vehicle's factory systems, not against them.

Real-World Performance

Typical Prado 250 Tuning Gains

The Prado 250 already has a strong factory torque curve, so the goal is not simply to chase the biggest possible peak figure. A good calibration improves usable torque, response and acceleration while keeping the power delivery controlled and predictable.

+25–30 kW / +35–40 hp Typical gains from our Prado 250 calibration. Exact results vary with vehicle condition, fuel, software version, ambient conditions and dyno setup.
Toyota Prado 250 dyno tuning results at TechTune Performance Perth
Prado 250 dyno testing at TechTune Performance. Dyno results vary between individual vehicles and testing conditions.
Prado 250 dyno tuning gains of 51 hp and 139 Nm at TechTune Performance Perth
Gains +51hp, +139Nm Roughly +30% more power and 30% more torque.
Full-Time 4WD — No Problem

Prado 250 Testing On Our Mechanically Linked AWD Dyno

The Prado 250 uses a full-time four-wheel-drive system with low-range gearing and a lockable Torsen centre differential. Our mechanically linked AWD dyno is designed to keep front and rear roller speed synchronised, allowing the vehicle to be tested under controlled load without treating it like a two-wheel-drive vehicle.

Controlled Load

Repeatable Testing

Dyno load lets us compare baseline and tuned behaviour under controlled conditions while monitoring the vehicle rather than relying only on short road pulls.

Proper Validation

Tune, Log, Re-Test

The vehicle is tested, data logged and re-run after calibration so changes can be verified against the original baseline.

Map-Level Calibration

More Than Fuel And Boost

The Prado 250 ECU uses multiple connected strategies to determine torque, fuel delivery, boost and driver demand. The exact maps and available functions vary with ECU software version, so the vehicle is identified and calibrated for its actual software rather than treated as a generic 1GD file.

Fuel Delivery

Fuel quantity is calibrated around airflow, load and the intended torque target.

Injection Timing

Timing is considered as part of the complete combustion and temperature strategy.

Boost Control

Target and actual boost behaviour are checked under repeatable dyno load.

Torque Management

Torque request and limiting strategies strongly influence how the Prado responds under load.

Driver Demand

Throttle response can be shaped to suit daily driving, touring and towing use.

Transmission Interaction

The eight-speed automatic and engine ECU exchange torque information, so engine calibration must remain compatible with the complete drivetrain strategy.

3.5-Tonne Factory Tow Rating

Prado 250 Tuning For Towing & Touring

Toyota rates the Prado 250 to tow up to 3,500 kg braked, making towing performance an important part of how many of these vehicles will actually be used. For towing and touring builds, we focus on progressive torque delivery and usable mid-range response rather than an unnecessarily aggressive calibration.

Towing

Torque Where You Use It

The tune can be developed around loaded vehicle weight, tyre size and towing use so the extra performance is delivered where the vehicle actually needs it.

Touring

Smooth, Predictable Delivery

Touring vehicles benefit from controlled throttle response, strong mid-range performance and a calibration designed for repeatable use rather than a one-off peak dyno figure.

J250 Technical Overview

New Prado Platform Details

The Prado 250 is more than an updated Prado 150. It moved to Toyota's TNGA-F ladder-frame architecture, the same broader platform family used by the LandCruiser 300 Series. For tuning purposes, the most relevant change is that the familiar 1GD engine now operates inside a newer drivetrain and electronic architecture.

1GD-FTV

2,755 cc four-cylinder common-rail turbo-diesel.

150 kW / 500 Nm

Factory peak engine output for Australian Prado 250 models.

48V V-Active

48-volt battery, motor-generator and DC/DC converter integrated with the powertrain.

8-Speed Automatic

New eight-speed automatic replaces the previous Prado's six-speed unit.

Full-Time 4WD

Dual-range system with a lockable Torsen centre differential.

TNGA-F Chassis

Modern body-on-frame platform shared with Toyota's larger LandCruiser architecture.

The TechTune Process

Test. Log. Calibrate. Validate.

01 / CHECK

Vehicle Assessment

Vehicle condition, modifications and intended use are reviewed before tuning.

02 / BASELINE

AWD Dyno Test

Baseline output and drivability are established under controlled load.

03 / LOG

Vehicle Data

Relevant engine and drivetrain data is monitored while the vehicle is tested.

04 / CAL

ECU Calibration

Required strategies are adjusted for the actual ECU software and intended vehicle use.

05 / VERIFY

Final Testing

The finished calibration is re-tested and refined where required.

Current Prado 250 Pricing

Prado 250 Tuning Options

Full Dyno Package

Engine + Transmission

$1,900

Toyota Multi-Mapping

Selectable Multi-Map Calibration

$3,500

AWD Dyno Testing

Included

Included with the tuning package.

Hard Cut Limiter

Included If Requested

Available where supported.

Malaga WA

Prado 250 Dyno Tuning Perth

TechTune Performance provides Toyota Prado 250 ECU tuning, diesel dyno tuning and controlled AWD dyno testing from our Malaga workshop in Perth, Western Australia.

If you use your Prado 250 for towing, touring, daily driving or simply want stronger performance from the 2.8L 1GD-FTV, we can develop the calibration around the way the vehicle is actually used.

Frequently Asked Questions

Prado 250 Dyno Tuning FAQ

What engine is in the Australian Prado 250?

Australian Prado 250 models use Toyota's 2.8-litre 1GD-FTV four-cylinder turbo-diesel with 48V V-Active technology. Factory output is 150 kW and 500 Nm.

What gains can I expect from a Prado 250 tune?

Typical gains are approximately +25–30 kW or +35–40 hp. The exact result varies with the individual vehicle, software version, fuel, environmental conditions and testing setup.

Can you run the Prado 250 on your dyno?

Yes. The Prado 250's full-time 4WD system is no issue for our mechanically linked AWD dyno, which keeps the front and rear dyno speeds synchronised during testing.

Is the Prado 250 engine the same as the older Prado 150?

It remains part of Toyota's 1GD-FTV 2.8L diesel family, but the Prado 250 uses newer vehicle electronics, 48V V-Active technology, an eight-speed automatic and its own ECU software environment. It should therefore be calibrated as its own platform.

Does the Prado 250 have a 48V hybrid system?

Toyota calls the system V-Active. It uses a 48V lithium-ion battery, motor-generator and DC/DC converter to support the diesel powertrain, including stop-start operation and improved drivability.

Is Prado 250 tuning useful for towing?

Yes. With a factory braked towing capacity of up to 3,500 kg, the Prado 250 is commonly used for towing. Calibration can be developed around stronger usable mid-range torque and progressive throttle response.

Is the finished tune tested?

Yes. The vehicle is baseline tested, data logged and re-tested under controlled load so the final calibration can be checked against the original vehicle behaviour.

Calibrated. Measured. Proven.

Ready To Tune Your Prado 250?

Tell us how your Prado is used, what modifications are fitted and what you want from the tune. We can build the calibration around towing, touring, daily driving or stronger performance.