Skip to main content
Toyota LandCruiser 70 Series | Perth

LandCruiser 70 SeriesDyno Tuning & Multi-Mapping

Custom calibration for both the 4.5L 1VD-FTV V8 and 2.8L 1GD-FTV, developed around the vehicle, its modifications and how it is actually used. Towing, touring, daily drivability, stronger performance and multi-mapping are available on supported setups, and a hard-cut limiter can be included as part of the tune on both the 1VD V8 and 1GD 2.8L if requested.

1VD-FTV 4.5L V8 1GD-FTV 2.8L AWD / 4WD Dyno Tested Multi-Mapping Available
$1,400Custom engine dyno tune.
$1,7502.8L engine + transmission combination.
From $2,800Switchable multi-mapping.
Malaga WAWorkshop-based calibration and dyno testing.
One 70 Series. Two Different Engines.

We Tune Both The1VD V8 & 1GD 2.8L

The 70 Series covers two very different diesel platforms, so we do not treat them as the same calibration with different numbers. The tune is built around the engine, transmission, vehicle weight, tyres, hardware and intended use.

4.5L V8 Diesel

1VD-FTV

The V8 responds well to careful fuel, boost, injection timing and torque strategy changes. Stock-hardware vehicles can gain stronger mid-range torque and response, while modified vehicles can be calibrated around upgraded intake, intercooler, exhaust and turbo hardware.

2.8L Four-Cylinder Diesel

1GD-FTV

The 2.8L LC70 uses the modern 1GD platform and automatic transmission. Calibration focuses on usable torque, boost control, fuel delivery, injection timing and torque management, with transmission calibration available as part of the combination package.

Built Around The Vehicle

Towing, Touring OrPerformance

A heavily loaded touring 79 Series needs a different calibration to a lightly loaded vehicle chasing stronger performance. Tyre size, added weight, intercooling, exhaust, intake and turbo changes all influence how the engine should be calibrated.

For towing and touring we focus on progressive torque delivery, controlled temperature and drivability under sustained load. For performance builds, the calibration is matched to the available airflow, fuel system and supporting hardware.

Toyota LandCruiser 70 Series at TechTune Performance
Map-Level Calibration

More ThanFuel And Boost

Exact maps vary between ECU versions and engine platforms, but both the 1VD and 1GD rely on multiple connected strategies. We calibrate the areas required for the vehicle rather than applying a generic percentage increase across the file.

Fuel Delivery

Fuel quantity is matched to airflow, load, hardware and the intended torque target.

Injection Timing

Timing is calibrated as part of the complete combustion and exhaust-temperature strategy.

Boost Control

Target and actual boost behaviour are checked under controlled dyno load.

Torque Management

Torque limiters and driver-demand strategies influence how the engine delivers power.

Throttle Response

Response can be shaped for daily use, towing, touring or a more aggressive setup.

Transmission Behaviour

Supported 2.8L automatic vehicles can have transmission calibration included with the engine tune.

Extra Calibration Options

Multi-Mapping,Hard Cut & More

Both 1VD and supported 1GD LC70 platforms can be configured with additional calibration features where the ECU strategy allows it.

Limiter Option

Hard Cut Limiter

A hard-cut limiter can be included as part of the tune on both the 1VD V8 and 1GD 2.8L if requested. We configure it as part of the calibration rather than treating it as a separate paid add-on.

Supporting Hardware

Modified Vehicles

Upgraded intercoolers, exhausts, airboxes and turbo systems can all be accounted for in the calibration. Larger builds should be tuned around the actual hardware rather than treated like a stock vehicle.

See It In Action

LandCruiser 70 SeriesDyno Tuning Short

Watch a quick TechTune Performance 70 Series clip. The video only loads after you click it, keeping the page lightweight while still giving visitors an easy way to see the vehicle and tuning work.

LandCruiser 70 Series tuning and calibration
Supporting Upgrades

Cooling & AirflowMatter Under Load

On vehicles that tow, tour or run higher-output hardware, intake temperature and transmission temperature become more important as load increases. Intercooler, exhaust, airbox and cooling upgrades can be selected around the actual use of the vehicle.

TechTune Performance handles the ECU and transmission calibration and dyno testing, while supporting mechanical upgrades can be organised through Airborne Suspension & Mechanical where required.

The TechTune Process

Test. Log. Calibrate.Validate.

01 / CHECK

Vehicle Assessment

Condition, modifications and intended use are reviewed first.

02 / BASELINE

Dyno Test

Baseline output and behaviour are established before calibration.

03 / LOG

Vehicle Data

Relevant engine and transmission data is monitored under load.

04 / CAL

Map Changes

Supported ECU strategies are adjusted around the vehicle and target use.

05 / VERIFY

Final Testing

The calibration is re-tested and refined where required.

Current LandCruiser 70 Pricing

1VD & 1GDTuning Options

LC70 4.5L 1VD-FTV V8

Custom Dyno Tune$1,400
Multi-MappingFrom $2,800
Hard Cut LimiterIncluded If Requested
Modified / Turbo BuildsEnquire

Modified vehicles are quoted around the hardware fitted and the calibration work required.

Malaga WA

LandCruiser 70 SeriesDyno Tuning Perth

TechTune Performance provides LandCruiser 70 Series ECU remapping, dyno tuning, multi-mapping and 2.8L transmission calibration from our Malaga workshop for customers across Perth and regional Western Australia.

We regularly work with 76, 78 and 79 Series vehicles used for towing, touring, work, off-road use and performance builds, with calibration developed around the actual vehicle rather than a generic one-size-fits-all file.

Frequently Asked Questions

LandCruiser 70Tuning FAQ

Do you tune both the V8 and 2.8L LandCruiser 70 Series?

Yes. We tune both the 4.5L 1VD-FTV V8 and the 2.8L 1GD-FTV platform, with the calibration matched to the engine, hardware and intended use.

Can you tune the 2.8L automatic transmission?

Yes. Transmission calibration is available on the 2.8L LC70, with a combined engine and transmission package currently listed at $1,750.

Do you offer multi-mapping on the LC70?

Yes. Multi-mapping is available on supported 1VD and 1GD LC70 vehicles, with selectable profiles configured around daily driving, towing, touring or stronger performance.

Can you add a hard cut limiter?

Yes. A hard-cut limiter can be included as part of the tune on both the 1VD V8 and 1GD 2.8L if requested.

Do modified 70 Series vehicles need a different tune?

Yes. Upgraded intercoolers, exhausts, airboxes, turbochargers and other hardware can change the airflow and load characteristics significantly, so the calibration should be matched to the actual setup.

Is the tune tested on the dyno?

Yes. Supported 70 Series calibrations are developed with controlled dyno testing and data logging so changes can be checked under repeatable load.

Calibrated. Measured. Proven.

Ready To Tune YourLandCruiser 70?

Tell us whether you have the 1VD V8 or 1GD 2.8L, what modifications are fitted, and whether you are chasing towing, touring, performance, multi-mapping or a hard-cut limiter setup.