Skip to main content
TechTune Performance TTP Tunes – Perth

Custom ECU & TCU Dyno Tuning, Logging & Calibration

TechTune Performance dyno tuning and calibration workshop Perth
Vehicle dyno testing and live data logging at TechTune Performance
ECU and TCU calibration work at TechTune Performance Perth
AWD dyno tuning and vehicle testing at TechTune Performance Malaga

TTP Tunes are built around controlled dyno testing, data logging and map-level calibration. Each tune is developed around the vehicle, its hardware and how it is used.

Tuning is carried out on our in-house mechanically linked AWD dyno with data logging and validation. We work directly with the factory ECU and, where supported, the transmission calibration. Learn more about our ECU remapping process.

AWD / 4WD DYNO TESTED
Linked-bed testing for controlled, repeatable load.
LIVE DATA LOGGING
Key engine and transmission data is logged while tuning.
MAP-LEVEL CALIBRATION
Relevant ECU and TCU calibration areas are adjusted directly.
BUILT AROUND THE VEHICLE
The calibration is matched to the vehicle and its use.
AWD

Linked Dyno Testing

Mechanically linked rollers for AWD / 4WD testing.
ECU

Map-Level Calibration

Map-level changes within the factory calibration.
TCU

Transmission Tuning

Where supported, transmission behaviour is matched to engine output.
LOG

Validation & Analysis

Data logging helps verify how the vehicle responds to calibration changes.
Tune Styles & Use Cases

Calibration Options Built Around The Job

The calibration is matched to how the vehicle is actually used.

Tow Tune

Controlled torque delivery and drivability for towing and load.

Performance Tune

Stronger output and response where the vehicle setup supports it.

Economy & Drivability Tune

Smoother response, usable torque and everyday drivability.

Multimapping

On supported platforms, selectable modes can suit different driving needs.
Testing & Validation

AWD Dyno Tuning & Logging Used To Validate The Tune

Every tune is tested and data logged under controlled load so the calibration can be checked and refined.

CONTROLLED DYNO WORKFLOW

Baseline testing, logging, calibration and validation form the core of the TechTune process.
BASELINE Initial dyno run Health check LOGGING Boost / MAF Fuel / torque CALIBRATE ECU / TCU Map strategy RETEST Dyno load Compare result REFINE USE-CASE Tow / road Driveability VALIDATE Final dyno check Measured result FINAL REVIEW Output check System behaviour COMPLETE
LOGGING
CALIBRATION
VALIDATION

DATA LOGGING

We data log the vehicle during tuning to verify key behaviour under load.
DATA LOGGING BOOST / MAP Pressure control FUEL / RAIL Delivery / pressure AIRFLOW MAF / load / lambda* TORQUE CONTROL Demand / limit TEMPERATURES IAT / coolant / EGT* TRANSMISSION Gear / slip / lock-up * WHERE SUPPORTED / AVAILABLE ON PLATFORM
AIRFLOW
TORQUE
TCU
Live vehicle data logging and tuning analysis at TechTune Performance Perth
Testing & Data Logging
We test and data log each tune as part of the calibration process so the final result can be checked and refined under controlled load.

DYNO LOAD TRACE

A linked AWD dyno gives repeatable load so changes can be compared properly.
LOAD RPM

LOGGING TRACE

Multiple channels can be reviewed together while the vehicle is being tested and calibrated.

ECU ↔ TCU INTEGRATION

Engine and transmission calibration can be developed together as one drivetrain strategy.
ECU ENGINE STRATEGY TCU SHIFT STRATEGY
The TechTune Method

How TTP Tunes Are Actually Developed

The goal is a controlled, driveable and validated result.

01 / VEHICLE

Vehicle Assessment

Condition, modifications and intended use are checked before tuning.
02 / BASELINE

Baseline Dyno Test

The vehicle is baseline tested under load before calibration changes.
03 / LOG

Live Data Logging

Engine and transmission data is reviewed during testing.
04 / CAL

Map-Level Calibration

ECU and TCU calibration changes are made around the actual vehicle.
05 / RETEST

Retest & Refinement

The revised calibration is retested and refined where needed.
06 / VERIFY

Validation For Real Use

The final result is checked against the vehicle's intended use.

Why Logging Matters

Logging helps us verify the tune and identify whether an issue is calibration-related or mechanical.

More Than Just Fuel & Boost

What A TTP Tune Actually Covers

The exact areas vary by platform, but the calibration is treated as a complete system.

Driver Demand & Torque

Driver demand and torque strategies are calibrated for smoother response.

Fuel & Injection Control

Fuel quantity and injection strategies are adjusted as part of the overall tune.

Boost & Turbo Control

Boost and airflow control are calibrated around the engine and hardware.

Protection Strategies

Factory protection strategies are considered as part of the calibration.

Transmission Behaviour

Where supported, transmission strategy is matched to the engine tune.

Hardware-Matched Tuning

Supporting hardware and modifications are considered in the final calibration.
Why TechTune Does It Differently

Generic File vs TTP Tune Development

A custom calibration is different from simply loading a generic file.

GENERIC FLASH FILE
  • Built to suit a broad range of vehicles
  • Limited vehicle-specific testing under load
  • May not account for vehicle-specific hardware or use
  • Often sold as a fixed “stage” file
  • Less focus on vehicle-specific drivability
CUSTOM TTP TUNE
  • Developed around the actual vehicle and its use
  • Backed by dyno testing and data logging
  • Changes are assessed under controlled load
  • Engine and transmission tuning can be matched together
  • Focused on drivability and validated performance
The Dyno Matters

Why The AWD Dyno Setup Matters

A mechanically linked AWD dyno gives us repeatable load for AWD, 4WD and 2WD vehicles.

Repeatable Load Control

Controlled load allows back-to-back comparison.

Controlled Validation

Calibration changes can be checked in a controlled workshop environment.

Modern Drivetrain Support

Linked testing suits modern AWD / 4WD drivetrains and automatics.

Learn more on our AWD dyno tuning page.

TTP Tunes FAQ

Frequently Asked Questions

How is a TTP Tune different from a generic remap?

TTP Tunes are developed around the actual vehicle using dyno testing and data logging rather than a generic file.

Do you tune the transmission as well?

Where supported, yes. The transmission tune can be matched to the engine output for better drivability.

Why do you data log during tuning?

Logging helps us verify how the vehicle responds during tuning and identify abnormal behaviour.

Can you tune modified vehicles?

Yes. Supporting hardware and vehicle use are considered when developing the tune.

Do you only tune diesel 4x4s?

No. We tune supported petrol and diesel applications.
Calibrated. Measured. Proven.

Ready For A Tune That Is Tested, Logged & Built Properly?

Custom ECU and transmission calibration, dyno tested and data logged at TechTune Performance.